IC-E27S CONTROLLER

IC-E27S CONTROLLER
FEATURES
-Compatible with Resistive load
-Application – New / Retro-fit
-up to 100% powte saving
-Maximum power loss of 1.5W per confroller
-Very low EMI & EMC
-Very low Voltage Harmonic Distortion
-Mains surge & spike to lerance
-Ambient temperature 10 to 55 ๐C
-Linear control

TECHNICAL USAGE
Program setup
Start by pressing th P button (the controller has 5 programs : P1-P5) and select your desirable number by
using up/dw button. Press ENT to confirm to confirm and store it in the system.

Working principle
If the load in LED and not incandescent, the SW By-pass should be at off position. When electricity is passed
through, the bulbs will light up gradually (soft start). It is recommended that P1 should be set to 00 (off) and
P2-P5 is to be selected at your desirable level. By using P1 as ypur off switch instead of turning off manually,
the light will gradually dim down to zero to prevent any rush of electricity that can cause flickering to LED lights.
While switching between programs, the bulbs will light up momentarily as th CPU confirms the change in new
setting and will store it as the last number. In the case of returning from electrical blackout, the bulbs will light up
gradually to the latest setting.